Electrolyzed Water Solutions

The Envirolyte units produce different modes of Electrolyzed Water solutions (anolyte and catholyte), depending on the working current strength, velocities of the stream of electrochemically treated water and its distribution in anode and cathode chambers.


Acidic Anolyte can be used wherever there is a need to disinfect or sanitize, in applications where the pH is unimportant and where there is no danger of corrosion. Anolyte is a very powerful disinfectant against all bacteria, viruses and algae even when it is diluted in water or sprayed in the air.




Neutral Anolyte is used wherever pH is important (corrosion) and where possible evaporation of active chlorine cannot be avoided. Neutral Anolyte is very effective against bacteria and viruses and is mostly used to disinfect swimming pools, drinking water or other water sources. Besides Neutral Anolyte is widely used to disinfect / sanitze objects (floors, wall, tools, foodstuff, etc.).



Alkaline Catholyte has a pH between 11 and 13 and can be used for flocculation (e.g. of heavy metals), coagulation, washing, extraction. Furthermore this solution can be used to wash wounds (instead of using iodine) and wherever there is a need to increase pH level of the water to be treated.



It has been proved by the tests conducted by the National Industrial Fuel Efficiency Service Ltd. (NIFES) on behalf of the Scottish Borders Enterprise that anolyte and catholyte produced by the Envirolyte unit have properties consistent with those claimed by the Envirolyte Industries International Ltd.